|
 |
 |
|
 |
High efficiency operation as it rotates substances for dispersion and to emulsification |
|
|
Stronger dispersion and emulsification than homogenous mixers via two or four more stators. |
|
|
Compatible with original tanks (over 1h.p) and good portability |
|
|
Hygienic plan, available for in situ cleaning |
|
|
Testing can easily be conducted for expensive raw materials with high added-value. |
|
|
Available remnant drainage after dispersion |
|
|
 |
|
| Better, more powerful AC motor that is quiet at high viscosity |
|
 |
|
| RPM control and safety loaded. High quality digital display Inverter. |
|
 |
|
| Easy to carry and stand |
|
 |
|
| Water leakage controlled with an air cooling structure and mechanical seals. |
| |
|
|
|
|
 |
Models |
Power |
Spinning speed |
Materials |
Number of Stators |
Injection Port/Discharge Port Diameter |
Size |
IM1HF |
0.5h.p |
0~6,000 rpm |
SUS304 (Wetting part)
SUS316L (Rotor and Stator) |
2 |
0.75inch / 0.5inch |
Mixer Body - W439xD170xH194 (mm)
Card and controller included - it may differ according to specifications,. |
IM001 |
1h.p |
0~6,000 rpm |
SUS304 (Wetting part)
SUS316L (Rotor and Stator) |
2 |
1.5inch / 0.75inch |
Mixer Body - W470xD200xH220 (mm)
Card and controller included - may differ according to specifications,. |
IM002 |
2h.p |
0~3,500 rpm |
SUS304 (Wetting part)
SUS316L (Rotor and Stator) |
2 |
1.5inch / 1inch |
Mixer Body - W620xD210xH245 (mm)
Card and controller included - may differ according to specifications,. |
IM005 |
5h.p |
0~3,500 rpm |
SUS304 (Wetting part)
SUS316L (Rotor and Stator) |
3 |
2inch / 1.5inch |
Mixer Body - W710 x D270 x H283 (mm)
Card and controller included - may differ according to specifications,. |
IM010 |
10h.p |
0~3,500 rpm |
SUS304 (Wetting part)
SUS316L (Rotor and Stator) |
3 |
2.5inch / 2inch |
Mixer Body - W716 x D320 x H340 (mm)
Card and controller included - may differ according to specifications,. |
IM030 |
30h.p |
0~1,500 rpm |
SUS304 (Wetting part)
SUS316L (Rotor and Stator) |
4 |
4inch / 3inch |
Mixer Body - W1156 x D350 x H500 (mm)
Card and controller included - may differ according to specifications,. |
IM050 |
50h.p |
0~1,500 rpm |
SUS304 (Wetting part)
SUS316L (Rotor and Stator) |
4 |
4inch / 3inch |
Mixer Body - W1220 x D420x H500 (mm)
Card and controller included - may differ according to specifications,. |
|
| |
|
|
|
 |
| - Powerful Shear force made by delicate gap |
Particle dispersion and emulsification are managed through multi-layered stators maintaining fine gaps
with rotors spinning at high speed
in a relatively short retention time. |
|
 |
|
 |
 |
-For tanks
Tank drains are connected to the inline mixer's injection port, and discharge port hoses are connected to the tank for increased overall dispersion efficiency. |
 |
-INLINE MIXING SYSTEM
A combination system with stuffed hoppers and –easy-to- carry carts is used by many companies as research laboratory pilot equipment. |
|
|
| 1. Motor Options |
|
Motor Options |
Usage |
Explosion-proof Motor
|
Explosion-proof motors prevent the release of explosive gases in special work environments.Depending on the work environment, methods such as pressure-resistant explosion-proof, increased safety explosion-proof, dust explosion-proof, and more may be selected suiting customer requirements.
|
Double Sealed Motor
(for high viscosity)
|
Double sealed motors for high viscosity prevent leakage from the small gaps between impeller chamber and the central spinning-shaft and can maintain cooling equipment. Can prevent the loss of sealing caused by high viscosity emulsification and dispersion. |
SUS CASE
|
Covers motors for a tidier, improved appearance. Can also protect from motor and spinning shaft heat. Colors customizable to customer requirements. |
Jacket
|
This jacket has cooling equipment to cool down fractional heat in the chamber when rotors and stators are operating. Effective when dispersing and emulsifying temperature-sensitive substances. |
Material Options |
|
Wetting part SUS316LReplacement
|
Quality corrosion resistance, anti-pitting, high - temperature durability, and anti-corrosive properties make this ideal for use in work environments where poisonous gases may be emitted or corrosive substances are used. |
|
|
| 2.Controller & Additional Option |
|
Controller |
Usage |
Standard Controller
(STEEL+PAINTING) |
Small controller in a SUS case, attached to a lift.
Spinning speed and lift length can be easily adjusted
*price of the mixer body does not include the controller. |
Explosion proof Casting |
Control panel designed to absorb explosive pressure inside the controller.
Prevents entry of explosive force inside the controller with its door cast at a minimal size. |
Explosion proof Air purging |
Explosive cannot enter the structured control panel, stores air produced by a separate pump |
Water proof GMP |
Control panel for use at production sites requiring Good manufacturing practices (GMP) or pharmaceutical production quality management standards. A standard control panel for the pharmaceutical production field. |
| *Control panel stands can be produced as special orders for an extra fee when using a mixer body assembly with a tank |
|
|
| 3.Cart Options |
|
Cart |
Usage |
Standard Mobile Cart |
Mobile cart made from SUS to easily carry inline mixers. Features wheels and a handle. Control panel and other options can be installed according to specifications |
Floor Extension Mobile Cart |
Hoppers with stands can be installed when a bigger hopper is needed.
A floor extension cart to carry a bigger hopper directly. |
Special Orders
(Non - standard Special)
|
We offer customized products tailored to customer requirements by phone if special structures or work environments exist. |
|
|
| 4.ACCESSORIES |
|
|
Usage |
HOPPER |
A tool made of SUS to easily channel substances to the mixer drain. It’s opening is parallel, and it’s easy to clean as it’s connected simply to a clamp.
|
JACKET HOPPER (COOLING) |
A hopper for dispersal and emulsification of temperature-sensitive substances, built with a double structure connected to water - cooling equipment. Effective for substances having dispersion heat and heat responses from inline mixers. |
JACKET HOPPER (COOLING/ CLOSED) |
Has a cooling hopper and vacuum deformation capability.
Air and heat from inline mixing can be effectively controlled. |
CLAMP,GASKET,PIPE |
Can be easily assembled by turning a screw at the parallel juncture to connect drains, hoppers, and valves.
Can prevent leakage of substances from the connection with a gasket. |
ROTOR |
An impeller component similar to a stator that spins at high speed together with a spinning shaft. It disperses and emulsifies substances via small gaps between it and the stator. |
STATOR |
A stator for Inline Mixers enabling high shear with small gaps between lots of grooves and the rotor. A 2 horsepower inline mixer stator features 2 stages for more intense dispersion and emulsification. |
3WAY VALVE |
This 3 way valve can carry substances elsewhere by adjusting the valve, and return them to the inline mixer. Can be easily assembled with a Parallel clamp and gasket. |
DRAIN VALVE SET |
A component to attach to the bottom of an inline mixer. The drain valve is used to clean and transport dispersed and emulsified substances elsewhere. |
|
|
| 5.Option Application Range |
|
Options |
Model |
IM1HF |
IM001 |
IM002 |
IM005 |
IM010 |
IM030 |
IM050 |
Motor Option |
Explosion-proof Motor |
O |
O |
O |
O |
O |
O |
O |
Double Sealed Motor |
O |
O |
O |
O |
O |
O |
O |
SUS Case |
O |
O |
O |
O |
O |
O |
O |
Jacket |
O |
O |
O |
O |
O |
O |
O |
Material Option |
Wetting part SUS316L Replacement |
O |
O |
O |
O |
O |
O |
O |
Controller
&Additional Option
|
Standard Controller |
O |
O |
O |
O |
O |
O |
O |
Explosion-proof Casing |
X |
X |
O |
O |
O |
O |
O |
Explosion-proof Air purging |
X |
X |
O |
O |
O |
O |
O |
Waterproof GMP |
X |
X |
O |
O |
O |
O |
O |
Cart Option |
Standard Mobile Cart |
X |
X |
O |
O |
O |
O |
O |
Floor Extension Mobile Cart |
X |
X |
O |
O |
O |
O |
O |
Special Orders (Non-standard) |
O |
O |
O |
O |
O |
O |
O |
Accessory |
HOPPER |
O |
O |
O |
O |
O |
O |
O |
JACKET HOPPER (COOLING) |
O |
O |
O |
O |
O |
O |
O |
JACKET HOPPER (COOLING/ CLOSED) |
O |
O |
O |
O |
O |
O |
O |
CLAMP,GASKET,PIPE |
O |
O |
O |
O |
O |
O |
O |
ROTOR |
X |
X |
O |
O |
O |
O |
O |
STATOR |
X |
X |
O |
O |
O |
O |
O |
3WAY VALVE |
X |
O |
O |
O |
O |
X |
X |
DRAIN VALVE SET |
O |
O |
O |
O |
O |
O |
O |
|
|
| |
| |
